Tulkot latviski
Inverter welder | 4.1kVA | 230VAC | 19A | 50/60Hz | MMA,TIG | IP21 | 56V
Inverter welder | 4.1kVA | 230VAC | 19A | 50/60Hz | MMA,TIG | IP21 | 56V
EB Kods: EB1479825080
Ražotāja preces kods: 2094
Ražotāja preces kods:
2094
Ražotājs, zīmols: STAMOS
Ražotājs, zīmols:
STAMOS
907,25 €
Ar PVN / gb
Pieejams piegādātāja noliktavā 1 gab.
⛟ Piegāde 1-3 darba dienas pēc apmaksas.
⛟ Piegāde 1-3 darba dienas pēc apmaksas.
| Type of device | inverter welder |
| Input current | 19A |
| Supply voltage frequency | 50/60Hz |
| Welding method | MMA |
| Welding method | TIG |
| IP rating | IP21 |
| Insulation class | F |
| Kit contents | ground clamp with cable |
| Kit contents | hammer with a wire brush |
| Kit contents | MMA welding holder with cable |
| Kit contents | TIG welding holder with 3,8m cable |
| Kit contents | welding mask |
| Efficiency | 85% |
| Plug variant | EU |
| Dimensions (a x b x c) | 325x510x365mm |
| Nominal duty cycle | 60% |
| Open circuit voltage | 56V |
| Welding current at 100% duty cycle | 154A |
| Welding equipment features | 2 T / 4 T change-over switch |
| Welding equipment features | ANTI STICK - prevents electrode from sticking to welding material |
| Welding equipment features | ARC FORCE - electrical arc stablization |
| Welding equipment features | connector for connecting a pedal |
| Welding equipment features | HOT START - easy to initiate an electrical arc |
| Welding equipment features | integrated solenoid gas valve |
| Welding equipment features | MOSFET technology |
| Welding equipment features | possibility to set current upslope and downslope time |
| Welding equipment features | possibility to set gas flow time after welding |
| Welding equipment features | PULS - possibility of pulse current welding |
| Welding equipment features | TIG AC - welding of aluminum and non-ferrous metals (brass, bronze) |
| Welding equipment features | TIG HF - non-contact electrical arc ignition using high frequency |
| Power factor | ≥0.7 |
| Welding current MMA | 10...200A |
| Electrode diameter (MMA) | 1...4mm |
| Method of cooling the handle | air |
| Welding current TIG-DC | 5...200A |
| Welding current at 60% duty cycle | 200A |
| Kind of display used | LED |
| Display parameters | 3 digit |
| Electrode diameter (TIG) | 1...3.2mm |
| Gas flow time after welding | 1...10s |
| Pulse frequency DC mode | 0.2...25Hz |
| Pulse current in PULSE mode | 5...200A |
| Welding current TIG-AC | 20...200A |
| Duty cycle factor | 10...90% |
| AC current balance | 20...80% |
| Output current frequency in AC mode | 60Hz |
| Supply voltage | 230V AC |
| Power consumption | 4.1kVA |