Industrial DIN Rail Power Supply - Single Output - 30 W - 5 V - 3 A

output: "•†DC voltage: 5 V "•†rated current: 3 A "•†current range: 0 - 3 A "•†rated power: 15 W "•†ripple & noise (max.): 80 mVp-p "•†voltage adj. range: 4.5 - 5.5 V "•†voltage tolerance: ± 2.0 % "•†line regulation: ± 1.0 % "•†load regulation: ± 1.0 % "•†setup, rise time: 500 ms, 50 ms / 230 VAC - 500 ms, 50 ms / 115 VAC at full load "•†hold up time (typ.): 30 ms / 230 VAC - 12 ms / 115 VAC at full load "†input: "•†voltage range: 85-264 VAC (277 VAC operational) - 120-370 VDC (390 VDC operational) "•†frequency range: 47 - 63 Hz "•†efficiency (typ.): 82 % "•†ac current (typ.): 0.88 A / 115 VAC - 0.48 A / 230 VAC "•†inrush current (typ.): cold start 25 A / 115 VAC - 45 A / 230 VAC "†protection: "•†overload: "••†105 - 160 % rated output power "••†protection type: constant current limiting, recovers automatically after fault condition is removed "•†overvoltage: "••†5.75 - 7.5 V "••†protection type: shut down output voltage, re-power on to recover "†environment: "•†working temperature: -30 to +70 °C "•†working humidity: 20 to 90 % RH non-condensing "•†storage: -40 to +85 °C, 10 to 95 % RH "•†temperature coefficient: ± 0.03 %/°C (0 - 50 °C ) "•†vibration: 10 - 500 Hz, 2G 10 min / 1 cycle, 60 min each along X, Y, Z axes, mounting: compliance to IEC60068-2-6 "•†operating altitude: 2000 m "•†over voltage category: III, according to EN61558, EN50178, EN60664-1, EN62477-1, altitude up to 2000 meters "†safety & EMC: "•†safety standards: UL60950-1, UL508, TUV EN61558-2-16, IEC60950-1 approved, design refer to TUV EN60950-1 "•†withstand voltage: input to output: 4 kVAC "•†isolation resistance: input to output: 100 MOhm / 500 VDC / 25 °C / 70 % RH "•†EMC emission: "••†conducted (EMC emission): EN55032 (CISPR32) / Class B "••†radiated: EN55032 (CISPR32) / Class B "••†harmonic current: EN61000-3-2 / Class A "••†voltage flicker: EN61000-3-3 "•†EMC immunity: "••†ESD: EN61000-4-2 / Level 3, 8KV air - Level 2, 4KV contact - criteria A "••†radiated susceptibility: EN61000-4-3 / Level 3 - criteria A "••†EFT/Burest: EN61000-4-4 / Level 3 - criteria A "••†surge: EN61000-4-5 / Level 4, 2KV/L-N - criteria A "••†conducted (EMC immunity): EN61000-4-6 / Level 3 - criteria A "••†magnetic field: EN61000-4-8 / Level 4, criteria A "••†voltage dips and interruptions: EN61000-4-11 / >95% dip 0.5 periods, 30% dip 25 periods - >95% interruptions 250 periods "†other: "•†MTBF: 968.1Kh, MIL-HDBK-217F (25 °C) "•†dimensions: 35 x 90 x 54.5 mm (W x H x D)
ultra slim design with 35 mm (2SU) width "†universal input 85-264 VAC (277 VAC operational) "†no load power consumption < 0.3 W "†isolation class II "†pass LPS (limited power source) "†DC output voltage adjustable "†protections: short circuit / overload / over voltage "†cooling by free air convection (working temperature : -30 - +70°C) "†DIN rail TS-35/7.5 or 15 mountable "†over voltage category III "†LED indicator power on "†3 year warranty "†for professional use only "†This device must be installed by a qualified person.