DIMMABLE LED POWER SUPPLY - CONSTANT CURRENT - 40 W - SELECTABLE OUTPUT CURRENT WITH PFC

Product basic info: "•†Instruction manual languages: English "•†Primary colours: Grey "•†Additional colours: Blue "•†Depth unit: 12.35 cm "•†Height unit: 2.3 cm "•†Width unit: 8.15 cm "•†Weight unit: 240 g "•†Material: Plastic + PS/LED "†Electrical data: "•†Standby power consumption: < 1 W "•†Environment specifications:

operating temperature: -30 to +60 &deg,C

operating humidity: 20-90 % RH non-condensing

storage: -40 to +80 &deg,C, 10-95 % RH

temperature coefficient: &plusmn, 0.03 %/&deg,C (0-50 &deg,C)

vibration: 10-500 Hz, 2G 10 min/1cycle, period for 60 min each along X, Y, Z axes

"•†Functionality specifications:

auxiliary power: 12 V @ 50 mA for driving fan, tolerance &plusmn, 5 %

temperature compensation: by external NTC thermistor (not provided with the power supply)

dimming

synchronization

"•†Input specifications:

voltage range: 180-295 VAC 254-417 VDC

frequency range: 47-63 Hz

power factor (typ.): &gt,= 0.975 / 230 VAC, &gt,= 0.96 / 277 VAC at rated power

total harmonic distortion: lower than 20 % when output load is 75 % or higher

efficiency (typ.): 91 %

AC current (typ.): 0.23 A / 230 VAC, 0.2 A / 277 VAC

inrush current (typ.): cold start 20 A (twidth = 260 &micro,s measured at 50 % Ipeak) at 230 VAC

leakage current: &lt, 0.5 mA / 240 VAC

"•†Mean time between failures (MTBF): MTBF: min. 260,600 h, MIL-HDBK-217F (25 &Acirc,&deg,C) "•†Protection specifications:

short circuit: constant current limiting, recovers automatically after fault condition is removed

overvoltage:

• 110-130 V
• protection type: shut down output voltage, re-power on to recover

over-temperature: shut down output voltage, re-power on to recover

"•†Safety and EMC specifications:

safety standards: UL8750, ENEC EN61347-1, EN61347-2-13, EN62384 independent approved

withstand voltage: input to output: 3.75 kVAC

isolation resistance: input to output: &gt, 100 Mohm / 500 VDC / 25 &deg,C / 70 % RH

EMC emission: compliance to EN55015, EN61000-3-2 Class C (&gt,= 40 % rated power), EN61000-3-3

EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547 light industry level (surge 2 kV), criteria A

"†Technical data: "•†Power rating: 42 W "•†Dimmable: Yes "•†Output specifications:

selectable current: 350 mA / 500 mA / 600 mA / 700 mA / 900 mA / 1050 mA

DC voltage range: 2-100 V / 2-80 V / 2-67 V / 2-57 V / 2-45 V / 2-40 V

rated power: 42 W

ripple current: &plusmn, 5.0 %

ripple &amp, noise (max.): 700 mVp-p

no-load output voltage (max.): 110 V / 65 V

current accuracy: &plusmn, 5.0 %

setup, rise time: 500 ms, 80 ms / 230 VAC at rated power

hold up time (typ.): 16 ms / 230 VAC at rated power

"•†Selectable current: Yes "†Set-up options: "•†Dimming type: PWM "†Environmental data: "•†Usage location: Indoor only "†Operational properties: "•†Power factor correction function (PFC): Yes
output current selectable by DIP switches "†180-295 VAC input only "†built-in active PFC function "†protection against: short circuit / overvoltage / over-temperature "†cooling: free air convection "†fully isolated plastic case "†Class II power unit, no FG (frame ground) "†built-in 0-10 VDC and PWM signal dimming function "†built-in 12 V / 50 mA auxiliary output "†IP20 "†logarithmic or linear dimming curve selectable (meets IEC62386-207) "†temperature compensation by external NTC thermistor (not incl.) "†no-load power consumption: < 1 W "†power supply synchronization function up to 10 units "†suitable for indoor LED lighting applications "†3 years warranty