• Silicone encapsulating compound | milky | 106g | -50÷200°C | 10kV/mm image 1
  • Silicone encapsulating compound | milky | 106g | -50÷200°C | 10kV/mm image 2
Tulkot latviski

Silicone encapsulating compound | milky | 106g | -50÷200°C | 10kV/mm

EB Kods: EB484164992

Ražotāja preces kods: 
ART.AGT-201

Ražotājs, zīmols: 
AG TERMOPASTY

12,83 €
Ar PVN / gb
Pieejams piegādātāja noliktavā 4 gab.
⛟ Piegāde 1-3 darba dienas pēc apmaksas. 
Uzdot jautājumu
-+

Product Properties

Type of chemical agentsilicone encapsulating compound
Colourmilky
Applicationsealing and encapsulation of electronic circuits
Shore hardness58
Operating temperature-50...200°C
Density1.2g/cm3 @ 25°C
Mix ratio100:6
Dielectric constant3
Appearanceliquid
Available labels languagesBG
Available labels languagesCZ
Available labels languagesDE
Available labels languagesEN
Available labels languagesFI
Available labels languagesFR
Available labels languagesHU
Available labels languagesPL
Available labels languagesRO
Available labels languagesRU
Available labels languagesSK
Surface resistance<10TΩ
Agent featurescondensation cure
Agent featurestwo-component
Signal wordWarning
Hazard statementsH226: Flammable liquid and vapour.
Hazard statementsH319: Causes serious eye irritation
Hazard statementsH332: Harmful if inhaled
Hazard statementsH335: May cause respiratory irritation.
Hazard statementsH371: May cause damage to organs
Precautionary statementsP210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Precautionary statementsP260: Do not breathe dust/fume/gas/mist/vapours/spray.
Precautionary statementsP280: Wear protective gloves/protective clothing/eye protection/face protection.
Precautionary statementsP312: Call a POISON CENTER or doctor/physician if you feel unwell.
Precautionary statementsP337 + P313: If eye irritation persists: Get medical advice/attention
Precautionary statementsP370 + P378: In case of fire: Use ...for extinction.
Curing methodRTV
Net weight106g
GHS CodeGHS02
GHS CodeGHS07
GHS CodeGHS08
Dielectric strength10kV/mm
Bonding time30min