DIGITAL MULTIMETER - CAT III 600 V - 10 A

Product basic info: "
†Instruction manual languages: Dutch, English, French, German, Polish, Portuguese, Spanish "
†Primary colours: Grey "
†Additional colours: Red "
†Depth unit: 40 mm "
†Height unit: 155 mm "
†Width unit: 74 mm "
†Weight unit: 155 g "
†Material: ABS "†Physical properties: "
†Cable length: 0.7 m "
†Display type: LCD "
†Backlight: No "†Electrical data: "
†AC current:

• basic accuracy: ± (1.5 % rdg + 3 digits) for 0 to 20 mA , ± (2.0 % rdg + 3 digits) for 200 mA, ± (2.5 % rdg + 5 digits) for 10 A
• frequency range: 40 - 500 Hz
• overload protection: 0.5 A / 600 V fuse in uA/mA range, 10 A / 600 V fuse in 10A range
• RMS of sine wave value (Average value)

"
†AC voltage:

• basis accuracy: ± (1.2 % rdg + 3 digits) for 0 to 200 V , ± (1.5 % rdg + 3 digits) for 600 V
• input impedance: 10 MOhm
• RMS of sine wave value (average value)
• overload protection: 600 V DC or AC rms
• frequency range: 40 - 500 Hz

"
†Audible continuity measurement: Yes "
†Audible continuity: &lt, 50 Ohm built-in buzzer sounds
"
†DC current:

• basic accuracy: ± (1.2 % rdg + 2 digits) for 0 to 20 mA , ± (1.5 % rdg + 2 digits) for 200 mA, ± (2.0 % rdg + 3 digits) for 10 A
• overload protection: 0.5 A / 600 V fuse in µA/mA range, 10 A / 600 V fuse in 10 A range

"
†DC voltage:

• basic accuracy: ± (1.0 % rdg + 2 digits) for 0 to 200 V , ± (1.2 % rdg + 2 digits) for 600 V
• input impedance: 10 MOhm
• overload protection: 600 V DC or AC rms

"
†Diode test: Yes "
†Diode test specifications: test voltage: approx. 1.8 V
"
†Transistor test: Yes "
†Transistor test speci:

• hFE: transistor hFE 0-1000
• test voltage: approx. 1.8 V

"
†AC current measurements: 10 A, 20 mA, 200 mA "
†AC voltage measurements: 0-200 mV, 2 V, 20 V, 200 V, 600 mV "
†DC current measurements: 0-600 µA, 15 A, 6 A, 60 mA, 600 mA, 6000 µA "
†DC voltage measurements: 0-200 mV, 2 V, 20 V, 200 V, 600 V "
†Resistance measurements: 0-200 Ohm, 2 kOhm, 2 MOhm, 20 kOhm, 20 MOhm, 200 kOhm "
†Resistance specifications:

• basic accuracy: ± (1.0% rdg + 3 digits) for 0 to 200 Ohm , ± (1.0 % rdg + 2 digits) for 2 kOhm to 2 mOhm , ± (1.5% rdg + 3 digits) for 20 mOhm
• overload protection: 600 V DC or AC rms
• open circuit voltage: approx. 0.6 V

"†Technical data: "
†Safety rating: Cat III / 600 V "
†Voltage tester type: AC / DC "
†Automatic power-off function: Yes "
†Data-hold function: Yes "†Environmental data: "
†IP rating: IPx0 "
†Usage location: Indoor only "
†Maximum operating humidity: < 80 % "†Operational properties: "
†Number ranges: 23 "
†Range setting: Manual "†Power supply: "
†Batteries included: Yes "
†Number of batteries: 2 "
†Low battery indicator: Yes "
†Battery composition: Alkaline "
†Battery IEC size: AAA (LR03, R03, FR03, HR03, KR03, ZR03 ,24A, 24D, 24LF, UM4, Micro, MN2400, MX2400, MV2400) "†Included: "
†Set contents: test lead probe : CAT III 600 V - 12 A - 18 AWG - 70 cm